Zte ZXR10 8900 Series Command Reference Manual page 44

ZXR10 8900 Series Command Reference (Multicast)
Syntax
Description
Instructions
34 Confidential and Proprietary Information of ZTE CORPORATION
group <group-addre
ss>
source <source-addr
ess>
summary
� If there is no option after this command, all multicast route
tables are displayed.
� If there is group option after this command, the * g and all
related group (s, g) route entries are displayed.
� If there are group and source address options after this com-
mand, specified (s, g) route entries are displayed.
�
Description of the displayed information is as follows:
Field
Connected
Pruned
RP-bit set
Register flag
SPT-bit set
Up Send
No Used
Join SPT
Uptime/Expires
RP
flag
Incoming interface:
RPF nbr
Outgoing interface
list
*
Multicast group address in the dotted decimal
format
Source address in the dotted decimal format
Summary display
Description
Specifies that the multicast group or the
interface has directly connected members
Outgoing interface of the route entry is null
This (S, g) entry is on the shared tree
The entry can send register messages of
the directly connected source
This route entry receives multicast packets
from SPT tree
Sends multicast packets upward to this
entry
The entry is not used
The data flow switches to the SPT tree
Running time and expire time of the
entry/outgoing interface
Corresponding RP of the (*, G) entry
generated by PIM-SM
Multicast routing entry status
Incoming interface of the entry
Corresponding RPF neighbor of the entry
List of the outgoing interfaces
Assert flag