Show Ip Msdp Sa-Cache - Zte ZXR10 8900 Series Command Reference Manual

Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Field
SA Filtering
SAs learned from this
peer
SAs limit
ip msdp peer

show ip msdp sa-cache

Use this command to display the (S,G) state learned from Multicast
Source Discovery Protocol (MSDP) peers.
All modes
show ip msdp sa-cache [<group-address>[<source-address>]]
<group-address>
<source-address>
If the two addresses are specified simultaneously, all (S, G) en-
tries corresponding to these addresses are displayed. If only the
multicast group address is specified, all sources of this multicast
group are displayed. If no option is specified, the entire SA cache
is displayed.
The following is sample output from the show ip msdp sa-cache
command.
ZXR10#show ip msdp sa-cache
MSDP Source-Active Cache - 4 entries
(101.101.101.101, 224.1.1.1), RP 49.4.4.4, 00:21:45/ 00:05:57
(101.101.101.101, 224.1.1.2), RP 49.4.4.4, 00:21:45/ 00:05:57
(101.101.101.101, 226.1.1.1), RP 50.4.4.4, 00:09:04/ 00:04:57
(101.101.101.101, 226.1.1.2), RP 50.4.4.4, 00:09:04/ 00:04:57
Description of the displayed information is as follows:
Field
(101.101.101.101,
224.1.1.1)
RP 49.4.4.4
00:21:45/ 00:05:57
Confidential and Proprietary Information of ZTE CORPORATION
Description
Information regarding access list filtering of
SA input and output, if any
Number of SA messages from the MSDP peer
in the SA cache
SA message limit for this MSDP peer
Multicast group address
Multicast source address
Description
The first address (source) is sending to the
second address (group)
IP address of the Rendezvous point (RP)
where the SA message originated
Local route has been cached for 21 minutes
and 45 seconds. If no SA message is received
in 5 minutes and 57 seconds, the route will
be removed from the SA cache
Chapter 5 MSDP Protocol
53