Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Related
Commands
Purpose
Command Modes
Syntax
static-rp
show ip pimsm interface
Use this command to show the interface where PIM-SM is config-
ured.
All modes
show ip pimsm interface [<interface-name>]
<interface-name>
1. To show the specified PIM-SM interface, use the <interface-na
me> option after this command.
2. Description of the displayed fields of the PIM-SM interface is as
follows:
Field
Address
Interface
NbrCount
State
QueryIntvl
DR Prio
DR
ip pim sm
show ip pimsm neighbor
show ip pimsm mroute
Use this command to show the content of the PIM-SM multicast
routing table.
All modes
show ip pimsm mroute [[group <group-address>[source
<source-address>]]|[source <source-address>]|[summary]]
Confidential and Proprietary Information of ZTE CORPORATION
Interface name
Description
Interface address configured on the interface
Interface name
Numebr of the neighbors
Interface status: up/down
Time interval for sending HELLO messages
DR priority of the interface
DR of the interface
Chapter 3 PIM-SM Protocol
33