Static-Rp Override - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Multicast)
Example
Related
Commands
Command
Function
Command Modes
Command format
Example
Related
Commands
38 Confidential and Proprietary Information of ZTE CORPORATION
This example describes how to configure the address 10.1.1.1 as
the static RP address to serve all multicast groups.
ZXR10(config-router)#static-rp 10.1.1.1
show ip pim rp mapping

static-rp override

This command is used to apply static RP for the same RP priorities.
By executing command no, static rp override function is disabled.
Routing PIM-SM Configuration Mode

static-rp override

no static-rp override
This configures static RP override, functioning on all multicast
groups.
ZXR10(config-router)#static-rp override
show ip pim rp mapping
show ip pim rp hash <group-address>