Show Ip Mforwarding - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Multicast)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
28 Confidential and Proprietary Information of ZTE CORPORATION
Field
Up Send
Assert flag
No Used
IIF MATCH
IIF Wrong
FORWARD
show ip mroute

show ip mforwarding

Use this command to show the multicast forwarding route entries.
All modes except user EXEC
show ip mforwarding {summary | group-address <group-ad
dress>[source-address <source-address>]}
summary
group-address
<group-address>
source-address
<source-address>
1. When there is no source address option after this command,
the (*, g) multicast forwarding entries are displayed. When
there is the source address option after this command, the (s,
g) multicast forwarding entries are displayed.
2. Description of the displayed information
Field
Up Send
Assert flag
No Used
IIF MATCH
Description
Sends multicast packets upward to this entry
Assert flag of the error interface receiving
multicast packets
The entry is not used
Multicast packets are matched on the
incoming interface
Multicast packets are not matched on the
incoming interface
Number of the multicast packets forwarded
on the outgoing interface
Summary information of the multicast
forwarding table
Multicast group address in the dotted decimal
format
Source address in the dotted decimal format
Description
Sends multicast packets upward to this entry
Assert flag of the error interface receiving
multicast packets
The entry is not used
Multicast packets are matched on the
incoming interface