Ext Tab - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference

Ext Tab

Ext Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Shared Active Key List
Shared Held Key List
PSK1 through PSK6
The Ext tabs vary by phone and depend on the number of extensions the phone
model supports. In a configuration profile, the Line parameters must be appended
with the appropriate numeral to indicate the line to which the setting applies. For
example:
[1] to specify line one
[2] to specify line two
Description
Softkeys that display when a call is active on a shared
line. (Cisco SPA525G or Cisco SPA525G2 only)
Softkeys that display when a call is on hold on a shared
line. (Cisco SPA525G or Cisco SPA525G2 only)
To configure a speed dial script, enter the following in
the PSK field:
fnc=sd;ext=extensionname@$PROXY;vid=out
boundextnum;nme=name
where fnc is the function of the key (speed dial), ext
(extensionname) is the extension being dialed, vid
is the extension on the calling phone from which the
outbound call is sent, and name is the name of the
speed dial being configured.
To configure an XML script, enter the following in the
PSK field:
fnc=xml;url=http://
scriptURL.xml;nme=scriptname
where fnc is the function of the key (an XML script),
scriptURL.xml is the URL where the script is
located, and scriptname is the name of the script.
A
291