Reverse The Handset Retention Tab - Cisco SPA50X User Manual

Installing Your Phone
Phone Connections
STEP 1
STEP 2
STEP 1
STEP 2
Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
To install the desk stand:
Connect the phone stand by lining up the tabs on the stand with the slots on the
phone body.
Slide the bottom tabs into the lower slots on the phone body and lightly press
down on the stand. It should easily slide into the upper stand slots. Do not force it.

Reverse the Handset Retention Tab

If you mount the phone to a vertical surface, such as a wall, you must reverse the
handset retention tab on the phone body so that the handset does not fall off the
phone when it is placed on the cradle.
Push the latch in.
Slide the retention tab up until it detaches from the phone.
2
18