Ext Tab - Cisco SPA303 Administration Manual

Cisco SPA IP Phone Field Reference

Ext Tab

Ext Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
PSK1 through PSK6
The Ext tabs vary by phone and depend on the number of extensions the phone
model supports.
This section describes the fields for the following Ext tab headings:
• General, page 274
• Share Line Appearance, page 295
• NAT Settings, page 296
• Network Settings, page 296
• SIP Settings, page 297
• Call Feature Settings, page 301
• Proxy and Registration, page 304
• Subscriber Information, page 306
• Audio Configuration, page 307
• Dial Plan, page 310
Description
To configure a speed dial script, enter the following
in the PSK field:
extensionname
fnc=sd;ext=
extnum ;nme= name
where fnc is the function of the key (speed dial), ext
extensionname
( ) is the extension being dialed,
the extension on the calling phone from which the
outbound call is sent, and
speed dial being configured.
To configure an XML script, enter the following in the
PSK field:
fnc=xml;url=http:// scriptURL.xml
where fnc is the function of the key (an XML script),
scriptURL.xml
is the URL where the script is located,
and scriptname is the name of the script.
B
outbound
@$PROXY;vid=
vid
name
is the name of the
;nme= scriptname
is
294