Table of Contents
Advertisement
CSL Operator Panel Switches
The CSL operator panel switches
Note: Refer to
Figure 2-4. CSL Operator Panel
1
10
Note: The IPL, Unload, Menu, and Select switches are identical to the switches
Autoload Mode Switch
The
Autoload Mode
modes: System, Automatic, or Manual.
The CSL powers on in the default mode selected in the drive configuration
menu. The default mode is overridden when the switch is used to select a new
setting. The CSL remains in the selected mode while the drive is powered on.
This does not change the IPL default mode in the drive configuration menu.
System Mode It allows the host to control CSL.
Autoload ModeIt allows the CSL to operate automatically.
Manual Mode It allows manual operations only.
95739
Figure 2-1 on page 2-1
explanation of its switches.
2
3
4
service
11
12
1. Power Indicator
2. Activity Indicator
3. Clean Indicator
4. Service Indicator
5. IPL Switch
6. Operator Indicator
7. System Indicator
located on the standard operator panel. They are not covered in this
section. Only the CSL
switch changes the operation of the CSL to one of three
Ninth Edition
CSL Operator Panel Switches
(Figure
2-4) are described in this section.
to see the standard operator panel and
5
6
7
14
13
8. Automatic Indicator
9. Manual Indicator
10. Unload Switch
11. Menu Switch
12. Select Switch
13. Operator Display
14. Start Switch
15. Autoload Mode Switch
and
Autoload Mode
Start
8
9
15
C53362
switches are covered.
2-7
Advertisement
Table of Contents
