Table of Contents
Advertisement
Drive Operations Menu
Table 4-5. Menu Table—Drive Operations (Continued)
Options
Notes
Code Update Submenu In Drive Main Menu
This selection updates the
IPL From Tp
(Initial Program
firmware in the drive from the
Load Drive from
firmware tape inserted in the
New Firmware
drive.
Tape)
Displays:
CodUpFailsx
(Code Update
Fail
Number x)—see
Table 5-2 on
page 5-3
for
help
Dump Tape Submenu in Drive Main Menu
This selection formats a dump
MakeDumpTp
(Make Dump
tape. It does not collect
Tape)
diagnostic data. Tapes used to
obtain dump data must first be
Displays:
formatted this way to accept
DmpCrFailx
dump data.
(Dump Create
Fail
Number x)—see
Table 5-2 on
page 5-3
for
help
4-18
Procedure
1. Press
bypassing, follow the remaining
steps:
2. Press
If a tape is present in the drive, it
ejects.
3. When Ld IPL TP displays, insert
the write-protected firmware tape
with the desired code.
When done, the drive automatically
ejects tape, IPLs, and comes online.
1. If applicable, press
access or twice to bypass. If not
bypassing, follow the remaining
steps:
2. Press
If a tape is present in the drive, it
ejects.
3. When Ld Dump Tp displays, insert
a write-enabled tape.
Old data on the tape is erased.
4. When the tape ejects, insert another
or press
submenu.
Ninth Edition
to bypass. If not
Menu
to activate.
Select
once to
Menu
to activate.
Select
to exit to the next
Menu
95739
Advertisement
Table of Contents
