Table of Contents
Advertisement
9. Work the cartridge through the feed channel to the cartridge stop mechanism.
a. Push down on the cartridge stop mechanism.
Note: This allows the cartridge to be removed from the front of the feed channel.
b. Grasp the cartridge and remove it from the feed channel.
CARTRIDGE
STOP
MECHANISM
10. Power on the CSL.
11. Refer to
"Power On/Off CSL" on page 6-10
Note: Refer to the figure below for location of the power switch.
If cartridges continue to jam, the CSL is defective and must be replaced.
TERMINATOR
SCSI
CABLE
95739
CARTRIDGE
FIRST
INDEX
ROD
C53618
for the power on procedures.
POWER
SWITCH
POWER
CORD
C53616
Ninth Edition
Jammed Cartridge
6-29
Advertisement
Table of Contents
