Table of Contents
Advertisement
Table 4-5. Menu Table—Drive Operations (Continued)
Options
Notes
Create Code Update Submenu in Drive Main Menu
This selection copies the
MakeCodeTp
(Make Code
firmware from the drive to the
Tape)
tape. This tape may be used to
update other drives using the
Displays:
Code Update submenu.
CodCrFailx
(Code Create
Fail
Number x)—see
Table 5-2 on
page 5-3
for
help
Reclaim Tape Submenu in Drive Main Menu
This selection reformats tapes
MakeDataTp
(Make Data
so they can be reused as
Tape)
normal data tapes. This is
referred to as "reclaiming."
Displays:
DatCrFailx
(Data Create Fail
Number x)—see
Table 5-2 on
page 5-3
for
help
95739
Procedure
Note: This procedure is for a qualified
technician only. Operators do
not use the function.
1. If applicable, press
access or twice to bypass. If not
bypassing, follow the remaining
steps:
2. Press
If a tape is present in the drive, it
ejects.
3. When Ld Data Tp displays, insert
write-enabled tape.
Old data on the tape is erased.
4. When tape ejects, insert another, or
press
Submenu.
Ninth Edition
Drive Operations Menu
once to
Menu
to activate.
Select
to go to the Drive Exit
Menu
4-19
Advertisement
Table of Contents
