Table of Contents
Advertisement
Shipping Insert
1. Power off the drive if power is applied.
POWER
SWITCH
Note: This drive uses a SCSI interface to the host.
2. Locate the manual unload device (MUD) screw on right-front area of the drive.
MUD
SCREW
3. Obtain a common screwdriver and insert it into the MUD slot.
4. Press against the spring-loaded MUD screw until it stops.
5-10
POWER
PLUG
C53636
C53637
Ninth Edition
1. MUD screw
95739
Advertisement
Table of Contents
