Clearing Csl Errors; Figure 6-18. Csl Rear View - StorageTek 9840 User's Reference Manual

3. Ensure all remaining cartridges to be loaded are placed within the input bin
correctly (cartridge reels to the right).
4. The CSL is now ready for normal operations.

Clearing CSL Errors

Refer to the following process to clear CSL errors. Follow the directions
explicitly.
Note: Any time the Operator indicator is flashing or on solid, clear the obvious
1. After correcting the error, press the
call out 14) to clear the Operator indicator.
2. If pressing the
Start
Note: Press the
3. If pressing the
cycle the CSL to bring it back online. Refer to
page 6-10
of the power switch.

Figure 6-18. CSL Rear View

Note: This CSL uses a SCSI interface to the host.
95739
error.
switch did not clear the Operator indicator, press the
Start
switch twice.
switch twice when there is a load failure or solid
Start
Operator indicator (red) on the CSL. Pressing the switch twice
reinitializes the CSL.
switch twice did not clear the Operator indicator, power
Start
to correctly power cycle the CSL.
TERMINATOR
SCSI
CABLE
Ninth Edition
Error and Recovery
switch (Figure 6-16 on page
Start
"Power On/Off CSL" on
Figure 6-18 shows the location
POWER
SWITCH
POWER
CORD
C53616
6-21,
6-23