9840 Tape Drive
Configuration Details
Table 1-1
Table 1-1. 9840 Configurations
Configuration
Desktop
(manual-load)
Desktop (CSL)
Rack-mount
(manual-load)
Note 1
Rack-mount (CSL)
Library-attached
Notes:
Display and Indicators
The 9840 Tape Drive operator panel display and indicators
you isolate problems and inform you of routine maintenance procedures. You
do not need to interrupt library operation for routine maintenance, such as
cleaning the drive. Other problems, such as those described in
"Drive Errors and Messages,"
Note:
1-2
shows the details of the 9840 Tape Drive configurations.
Interface
Fibre Channel or
SCSI
ESCON, Fibre
Channel, or SCSI
ESCON, Fibre
Channel, or SCSI
ESCON , Fibre
Channel, or SCSI
Note 2
1. Manual-load and CSL drives may be intermixed in a single rack.
Refer to
Table 1-4 on page 1-14
drives installed within each rack.
2. Interfaces vary with each library. Refer to
for specific interfaces.
3. The number of drives in each library varies. Refer to
page 1-14
for specific number of drives installed within each
library.
Figure 1-2
illustrates a standard operator panel.
illustrates the Cartridge Scratch Loader (CSL) operator panel.
Ninth Edition
Number of
Drives
1
1
1-12
1-6
Note 3
for specific number of CSL and
may require other actions.
Figure and Page
Figure 1-1 on
page 1-1
Figure 1-11 on
page 1-13
Figure 1-9 on
page 1-11
Figure 1-7 on
page 1-9
Table 1-4 on page 1-14
Table 1-4 on
(Figure
1-2) help
Chapter 5,
Figure 1-4 on page 1-6
95739