CSL Code Level Main Menu Task
CSL Code Level Main Menu Task
Use the Cartridge Scratch Loader (CSL) Code Level Main Menu to view the
firmware level used by the CSL.
View CSL Code Level
To view the CSL code level, follow these steps:
1. Place the 9840 Tape Drive online (see
2. Press the
The operator panel displays the level of code used by the CSL. The format
is CSL x.y.zz, where x is the major revision number, y is the minor
revision number, and zz is the integration number.
Note: If no CSL is attached, the display shows CSL NONE.
3. Press the
message.
4. Press the
The operator panel displays the "Online" message.
5. Press the
4-28
switch to reach the CSL code level main menu.
Menu
switch until the operator panel displays the "Exit Menu?"
Menu
switch to return to the Online/Offline menu.
Menu
switch to exit the menu system.
Menu
Ninth Edition
"Online" on page
4-22).
95739