Table of Contents
Advertisement
Write-Protecting a Cartridge
Process
Follow these instructions to write protect a standard or VolSafe cartridge:
1. Hold the cartridge with the customer label side up and rear volser label
towards you.
2. Locate the write protect switch on the right side of the cartridge
(Figure
3. Move the switch to the front of the cartridge (away from you) to the write-
protect position.
Figure 3-3. Cartridges
STARDARD CARTRIDGE
1
6
5
REAR VIEW
1. Manufacturer Label Area (yellow on VolSafe Cartridge)
2. Customer Label
3. Write Protect Switch (yellow on VolSafe Cartridge)
4. Finger Grips
5. VOLSER Label Area
6. Media Id (machine identifiable-yellow on VolSafe Cartridge)
3-4
3-3).
2
WRITE
PROTECT
3
6
4
Ninth Edition
VOLSAFE CARTRIDGE
2
1
4
5
REAR VIEW
WRITE
PROTECT
3
C53605
95739
Advertisement
Table of Contents
