Table of Contents
Advertisement
Power Indicator
The green Power indicator signifies the following conditions:
Off
Flashing
On
Service Indicator
The red Service indicator signifies the following conditions:
Off
Flashing
On constant A hardware error was detected because a 9840 Tape Drive is not
95739
The power is off.
The 9840 Tape Drive is non-operational. The 9840 Tape Drive
may be experiencing one of the following symptoms:
- It is performing a power on or an IPL.
- It is collecting diagnostic data.
- It failed a power-on diagnostic.
See
Table 5-2
in
Chapter 5, "Drive Errors and Messages,"
more information about these operator panel messages.
The power on and IPL completed successfully.
An error was not detected.
An error was detected and diagnostic data may have been
collected.
Following a successful IPL and if diagnostic dump data are
available, the operator panel alternates the "*" (asterisk) and the
"xxxx:Dmp y" message (where xxxx is the fault symptom
code of the last diagnostic dump data and y is the number of
uncollected diagnostic data dumps in the EEPROM). See
Table 5-2
in
Chapter 5, "Drive Errors and Messages,"
information about these messages.
The flashing stops, and the messages disappear when you insert
any cartridge tape into the 9840 Tape Drive or you press a
switch.
If the 9840 Tape Drive detects the same fault symptom code
again, the operator panel displays the "DumpAgain?" message,
which requires authorized service personnel to resolve the
problem.
functional. If an IPL does not resolve the situation, authorized
service personnel may need to replace the 9840 Tape Drive.
Ninth Edition
Standard Operator Panel Indicators
for
for more
2-5
Advertisement
Table of Contents
