Standard Operator Panel Indicators
Standard Operator Panel Indicators
This section describes the standard operator panel indicators
which are presented in alphabetical order. CSL indicators
page
2-7) are discussed later in this chapter.
Figure 2-3. Standard Operator Panel Indicators
Notes:
Activity Indicator
The green Activity indicator signifies the following conditions:
Off
Flashing
On
Clean Indicator
The amber Clean indicator signifies the following conditions:
On
Off
2-4
POWER
ACTIVITY
INDICATOR
INDICATOR
• A combined display of some operator panel indicators may mean
that you must perform corrective procedures. For more information,
see
Chapter 5, "Drive Errors and Messages."
• Specific CSL errors and messages are located in
"Cartridge Scratch Loader."
The cartridge tape is not loaded or it has ejected.
The tape in the cartridge is moving.
The cartridge tape is loaded and the 9840 Tape Drive is ready.
The 9840 Tape Drive requires cleaning because either
intermittent media errors are detected or a specific length of
tape has passed over the read/write heads.
The 9840 Tape Drive does not require cleaning.
Ninth Edition
CLEAN
SERVICE
INDICATOR
INDICATOR
C53642
(Figure
2-3),
(Figure 2-4 on
Chapter 6,
95739