Table of Contents
Advertisement
Jammed Cartridge
b. Turn the MUD screw to the right (CW) until the cartridge rests on the feed roller.
FEED
CHANNEL
INPUT
BIN
7. Remove the screwdriver.
8. Remove the cartridge from the 9840 Tape Drive.
Note: The cartridge will not eject completely out of the CSL. It will only eject out of the
drive and stop deep inside the feed channel on the feed roller.
a. Use both hands and reach between the input bin and output bin sliders.
b. Grasp the cartridge with your fingers.
c. Slowly work the cartridge out of the drive through the feed channel.
FEED CHANNEL
6-28
MUD
SCREW
A
CARTRIDGE
C53624
Ninth Edition
FEED
ROLLER
DETAIL A
C53640
95739
Advertisement
Table of Contents
