Table of Contents
Advertisement
Firmware Release Main Menu Task
Use the Firmware Release main menu to view the level of the firmware used by
the 9840 Tape Drive.
View Firmware Release Level
View the firmware release level to determine if the firmware in the 9840 Tape
Drive requires an update.
To view the firmware release level, follow these steps:
1. Place the 9840 Tape Drive online (see
2. Press the
The operator panel displays the level of the firmware release used by the
9840 Tape Drive. The format is Rx.yy.zzzc, where x is the major revision
number, yy is the minor revision number, zzz is the integration number,
and c is the channel type ("s" is SCSI, "e" is ESCON, "f" is Fibre Channel).
3. Press the
message.
4. Press the
The operator panel displays the "Online" message.
5. Press the
95739
switch to reach the Firmware Release main menu.
Menu
switch until the operator panel displays the "Exit Menu?"
Menu
switch to return to the Online/Offline menu.
Menu
switch to exit the menu system.
Menu
Ninth Edition
Firmware Release Main Menu Task
"Online" on page
4-22).
4-27
Advertisement
Table of Contents
