Table of Contents
Advertisement
Main Menu Summary
This chapter describes the following topics:
•
"Main Menu Summary"
•
"Menu Operations" on page 4-4
•
"View Fibre Channel Configuration Status" on page 4-7
•
"View SCSI Configuration Status" on page 4-10
•
"View ESCON Configuration Status" on page 4-13
•
"Drive Operations Menu" on page 4-16
•
"Online/Offline Main Menu Tasks" on page 4-22
•
"View Configuration Main Menu Task" on page 4-24
•
"Select a Language" on page 4-25
•
"Select Tape Bar Task" on page 4-25
•
"Reclaim Cartridge Tape" on page 4-25
•
"Firmware Release Main Menu Task" on page 4-27
•
"CSL Code Level Main Menu Task" on page 4-28
•
"Exit Main Menu Tasks" on page 4-29
•
"Tape Bar-Chart Explanation" on page 4-31
Note: This chapter includes only operator procedures. Procedures that require
Main Menu Summary
Table 4-1
Table 4-1. Summary of Main Menus
Main Menu
Online/Offline
ESCON Port
Enable/Disable
View
Configuration
4-2
the help of authorized service personnel are not included.
describes the 9840 Tape Drive main menus.
Description
Use this main menu to place the 9840 Tape Drive offline
for some procedures and online for other procedures.
After the 9840 Tape Drive is set offline or online, use this
main menu as the entry point to other main menus.
Use this menu to enable or disable the ESCON port if the
9840 Tape Drive uses an ESCON interface. If the 9840
Tape Drive does not use an ESCON interface, this main
menu does not display. Menus are different for Fibre
Channel, SCSI, and ESCON.
Use this main menu to view the configuration of the 9840
Tape Drive. When the 9840 Tape Drive is online (As in
Figure 4-2 on page
of the configuration submenus shown in
page
4-6, for Fibre Channel, SCSI, or ESCON, depending
on the host interface.
Ninth Edition
4-3), this main menu shows the values
Figure 4-4 on
95739
Advertisement
Table of Contents
