Table of Contents
Advertisement
Shipping Insert
WARNING:
Do not turn the screwdriver to the right or clockwise (CW) when preparing the drive
for a shipping insert.
5. Slowly turn the screwdriver to the left or counter-clockwise (CCW) to raise the reel
motors and to lower the cleaning brush.
Note: When the MUD screw will not turn any further, the reel motors are raised and the
cleaning brush is lowered.
6. Remove the screwdriver.
7. Insert and lock the shipping insert in the 9840 Tape Drive.
Note: Some force must be used to insert the shipping insert past the feed roller.
8. Gently pull the shipping insert outward to verify it is locked within the carriage.
FEED
CHANNEL
CARTRIDGE
STOP
MECHANISM
9. Send the defective CSL to StorageTek.
6-34
C53363
SHIPPING
INSERT
FEED
ROLLER
INPUT
BIN
C53622
Ninth Edition
95739
Advertisement
Table of Contents
