Operator Panel
Operator Panel
Note: The 9840 Tape Drive and CSL operator panel use small push-button
The operator panel
left half of the operator panel contains the indicators and switches specifically
for the 9840 Tape Drive.
The right half of the operator panel contains the indicators and switches
specifically for the CSL. They are:
• Operator Indicator (6)
• System Indicator (7)
• Automatic Indicator (8)
• Manual Indicator (9)
•
Start
•
Autoload Mode
Figure 6-6. CSL Operator Panel
1
10
Note: The
switch (5) only IPLs the drive. Use the
IPL
IPL the CSL.
Note: Only the CSL indicators and switches are discussed in this section. Refer
6-6
switches. The term switch or switches is used to identify them
throughout this manual.
(Figure
6-6) allows a human interface to the subsystem. The
Switch (14)
Switch (15)
2
3
4
service
11
12
1. Power Indicator
2. Activity Indicator
3. Clean Indicator
4. Service Indicator
5. IPL Switch
6. Operator Indicator
7. System Indicator
to
"Operator Panel" on page 1-4
Drive indicators and switches.
Ninth Edition
6
7
5
14
13
8. Automatic Indicator
9. Manual Indicator
10. Unload Switch
11. Menu Switch
12. Select Switch
13. Operator Display
14. Start Switch
15. Autoload Mode Switch
switch on the back of the CSL to
Power
for an explanation of the 9840 Tape
8
9
15
C53362
95739