Operator Panel
Operator Panel
The operator panel is the interface between the operator and the 9840 Tape
Drive.
Two types of operator panels are available for the 9840 Tape Drive equipment:
• Standard
• CSL
Figure 1-3
and library configurations.
Figure 1-4 on page 1-6
rack-mount CSL configuratons.
Notes:
Standard Operator Panel
The standard operator panel
and four indicators.
The standard 9840 Tape Drive
and a display are described in
1-4
shows the standard operator panel, used in the desktop, rack-mount,
shows the CSL operator panel, used in the desktop or
• The standard and CSL operator panels use small push-button
switches. The term switch or switches is used to identify them
throughout this manual.
• The standard 9840 Tape Drive operator panel switches and
indicators are replicated on the CSL panel. See
page
1-6.
(Figure
Ninth Edition
1-3) has a 10-digit display, four switches,
(Figure
1-3) operator panel switches, indicators,
Chapter 2, "Operator Panel Details."
Figure 1-4 on
95739