Figure 8-43. System Setup Level 1 Screen - Eaton Powerware 9390 Installation And Operation Manual

USING THE CONTROL PANEL
8-32
EATON Powerware
The System Setup Level 1 screen can be used to set the UPS date and time, set the
serial ports, change the Level 1 password, and log out of Level 1. In addition, the
Level 0 functions are available. Figure 8‐43 shows the System Setup Level 1 screen.
Use the or pushbuttons to highlight the setup function screen desired, then
press the SELECT pushbutton to display the function screen.
The Level 1 screen times out after 60 minutes or can be logged out at any time by
selecting the LOG OUT function from the menu screen.
SYSTEM SETUP LEVEL 1
LOG OUT
ENTER PASSWORD
CHANGE PASSWORD
ENTER PASS­
CONTRAST ADJUST
WORD
VERSIONS
UNIT TYPE
Figure 8‐43. System Setup Level 1 Screen
®
9390 UPS (20–80 kVA) Installation and Operation Manual
SELECT
S
164201603 Rev 2 www.powerware.com