Figure 8-25. Maximum Current Log Setup Screen 2 - Eaton Powerware 9390 Installation And Operation Manual

USING THE CONTROL PANEL
8-20
EATON Powerware
Press the CHANGE pushbutton on the Maximum Current Log Setup Menu bar to
display the Maximum Current Log Setup screen 2.
The Maximum Current Log Setup screen can be used to set up or change the time
interval, the maximum percent of load, and the calculation method (three-phase
average or individual phases) log settings. Figure 8‐25 shows the Maximum Current
Log Setup screen 2.
Use the or pushbuttons to highlight the setup function screen desired, then
press the SELECT pushbutton to display the function screen.
To return to the Maximum Current Log Setup screen 1, press the
the menu bar.
MAXIMUM CURRENT LOG SETUP
TIME INTERVAL MONITORED
MAXIMUM % OF FULL LOAD
CALCULATION METHOD
Figure 8‐25. Maximum Current Log Setup Screen 2
®
9390 UPS (20–80 kVA) Installation and Operation Manual
SELECT
S
164201603 Rev 2 www.powerware.com
pushbutton on