System Setup Level 0 Screens; Figure 8-38. System Setup Level 0 Screen - Eaton Powerware 9390 Installation And Operation Manual

8.2.8

System Setup Level 0 Screens

Press the SETUP pushbutton on the main menu bar to display the System Setup
Level 0 Screen. This screen can be used to:
S
Enter a password to access Level 1 functions (see paragraph 8.2.9)
No password is necessary to access Level 0 functions.
S
Set the screen contrast
S
Show the firmware versions installed
S
Identify the unit type
Figure 8‐38 shows the System Setup Level 0 menu screen.
Use the
press the SELECT pushbutton to display the function screen.
SYSTEM SETUP LEVEL 0
Figure 8‐38. System Setup Level 0 Screen
®
EATON Powerware 9390 UPS (20–80 kVA) Installation and Operation Manual
or pushbuttons to highlight the setup function screen desired, then
ENTER PASSWORD
CONTRAST ADJUST
VERSIONS
UNIT TYPE
USING THE CONTROL PANEL
SELECT
S
164201603 Rev 2 www.powerware.com
8-29