Figure 9-38. System Setup Level 0 Screen - Eaton Powerware 9390 Installation And Operation Manual

9.2.8 System Setup Level 0 Screens
Press the SETUP pushbutton on the main menu bar to display the System Setup Level 0
Screen. This screen can be used to:
Figure 9-38 shows the System Setup Level 0 menu screen.
Use the
SELECT pushbutton to display the function screen.
EATON Powerware 9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev E powerware.com
®
Enter a password to access Level 1 functions (see paragraph 9.2.9)
No password is necessary to access Level 0 functions.
Set the screen contrast
Show the firmware versions installed
Identify the unit type
or pushbuttons to highlight the setup function screen desired, then press the
SYSTEM SETUP LEVEL 0

Figure 9-38. System Setup Level 0 Screen

ENTER PASSWORD
CONTRAST ADJUST
VERSIONS
UNIT TYPE
SELECT
Using the Control Panel
9-33