Figure 8-50. Com Setup Screen - Eaton Powerware 9390 Installation And Operation Manual

USING THE CONTROL PANEL
BAUD RATE
DATA BITS
STOP BITS
PARITY
8-38
EATON Powerware
The COM Setup screen is used to change and save the settings for the serial
communication ports. The COM port number selected from the COM Port Setup
screen displays. If the changes are not wanted, use the ABORT pushbutton to return
to the COM Port Setup screen. Figure 8‐50 shows the COM Setup screen.
Use the or pushbuttons to highlight the setting to be changed. Use the
pushbutton to toggle through the values for the setting to make the change. Press
SAVE or ABORT. Once the action is completed, the COM Port Setup screen appears.
COM 1 SETUP
Figure 8‐50. COM Setup Screen
®
9390 UPS (20–80 kVA) Installation and Operation Manual
19200
8
1
NONE
ABORT
SAVE
S
164201603 Rev 2 www.powerware.com