System Setup Level 0 Screens; Figure 8-38. System Setup Level 0 Screen - Eaton Powerware 9390 Installation And Operation Manual

8.2.8

System Setup Level 0 Screens

Press the SETUP pushbutton on the main menu bar to display the System Setup Level
0 Screen. This screen can be used to:
S
Enter a password to access Level 1 functions (see paragraph 8.2.9)
No password is necessary to access Level 0 functions.
S
Set the screen contrast
S
Show the firmware versions installed
S
Identify the unit type
Figure 8‐38 shows the System Setup Level 0 menu screen.
Use the
press the SELECT pushbutton to display the function screen.
SYSTEM SETUP LEVEL 0
Figure 8‐38. System Setup Level 0 Screen
Eaton 9390 UPS (100–160 kVA) Installation and Operation Manual
or pushbuttons to highlight the setup function screen desired, then
ENTER PASSWORD
CONTRAST ADJUST
VERSIONS
UNIT TYPE
S
164201604 Rev E www.eaton.com/powerquality
USING THE CONTROL PANEL
SELECT
8-29