Getting Started
Hardware Installation
T-Bar Ceiling Installation
Perform the following steps to mount the Dual Band REA to a T-bar ceiling:
1. Detach the Antenna Body from the Main Base.
2. Remove the Metal Plate.
3. Turn over the Bottom Plate and reinstall it on the Main Base.
4. Attach the antenna to the T-Bar and adjust/swivel it to lock on the T-Bar.
Attaching Antenna(s) to the AP-4000
Perform the following steps to attach a Dual Band REA to the AP-4000.
1. Press down near the center of the compartment covering and slide open the External Antenna Access compartment on the AP-4000.
The compartment closer to the LED panel contains the connectors for the 802.11 b/g radio, and the other compartment contains the
connectors for the 802.11a radio.
NOTE
There is one AP-4000 model that does not provide external antenna connectors for 5GHz (802.11a) operation.
Figure 2-6
Opening an AP-4000 Antenna Compartment
AP-4000 User Guide
24