Proxim AP-4000 User Manual page 62
Orinoco ap-4000 access point user guide
Hide thumbs
Also See for AP-4000:
- User manual (274 pages) ,
- Specification sheet (2 pages) ,
- Configuration manual (6 pages)
Table of Contents
Advertisement
Performing Advanced Configuration
Management
6. Set the value of the Bootfile Name parameter to the Configuration filename. For example: AP-Config
7. If using Syslog, set the Log server IP address (option 7, Log Servers).
8. Reboot the AP. When the AP reboots it receives the new configuration information and must reboot one additional time. If a Syslog server
was configured, the following messages can be observed on the Syslog server:
•
AutoConfig for Dynamic IP
•
TFTP server address and configuration filename
•
AutoConfig Successful
AP-4000 User Guide
62
Advertisement
Table of Contents
