Product Package; System Requirements - Proxim AP-4000 User Manual

Getting Started

Product Package

Product Package
Each AP-4000 comes with the following:
• AP-4000 unit (with integrated 802.11a radio and 802.11b/g radio, and Active Ethernet)
• Power adapter
• One ceiling or wall mounting plate
• Security cover
• One Installation CD-ROM that contains the following:
– Software Installation Wizard
– ScanTool
– Solarwinds TFTP software
– MIBs
– HTML Help
– User's Guide in PDF format
• One Access Point Quick Start Flyer
If any of these items are missing or damaged, please contact your reseller or Technical Support (see Technical Support for contact
information).

System Requirements

To begin using an AP, you must have the following minimum requirements:
• A 10Base-T Ethernet or 100Base-TX Fast Ethernet switch or hub or cross-over Ethernet cable
• At least one of the following IEEE 802.11-compliant devices:
– An 802.11a, 802.11b, or 802.11b/g client device
• A computer that is connected to the same IP network as the AP and has one of the following Web browsers installed:
– Microsoft Internet Explorer 6 with Service Pack 1 or later and patch Q323308
– Netscape 7.1 or later
(The computer is required to configure the AP using the HTTP interface.)
AP-4000 User Guide
20