Set Interface Management Services - Proxim AP-4000 User Manual
Orinoco ap-4000 access point user guide
Hide thumbs
Also See for AP-4000:
- User manual (274 pages) ,
- Specification sheet (2 pages) ,
- Configuration manual (6 pages)
Table of Contents
Advertisement
Using the Command Line Interface (CLI)
Other Network Settings
100 Mbits/sec - full duplex
Auto Speed - half duplex
Auto Speed - auto duplex
Set Interface Management Services
Edit Management IP Access Table
[Device-Name]>set mgmtipaccesstbl <index> ipaddr <IP address> ipmask <subnet mask>
Configure Management Ports
[Device-Name]>set snmpifbitmask <(see below)>
[Device-Name]>set httpifbitmask <(see below)>
[Device-Name]>set telifbitmask <(see below)>
Choose from the following values:
Interface bitmask
0 or 2 = disable (all interfaces)
1 or 3 = Ethernet only
4 or 6 = Wireless A only
8 or 10 = Wireless B only
12 = Wireless A and Wireless B
13 or 15 = all interfaces
Set Communication Ports
[Device-Name]>set httpport <HTTP port number (default is 80)>
[Device-Name]>set telport <Telnet port number (default is 23)>
Configure Secure Socket Layer (HTTPS)
Enabling SSL and configuring a passphrase allows encrypted Secure Socket Layer communications to the AP through the HTTPS interface.
[Device-Name]>set sslstatus <enable/disable>
The user must change the SSL passphrase when uploading a new certificate/private key pair, which will have a corresponding passphrase.
[Device-Name]>set sslpassphrase <SSL certificate passphrase>
[Device-Name]>show http
To view all HTTP configuration information including SSL.
HTTP Group Parameters
=====================
httpifbitmask
httppasswd
httpport
httphelplink
httpsetupwiz
sslstatus
sslpassphrase
Set Telnet Session Timeouts
[Device-Name]>set tellogintout <time in seconds between 1 and 300 (default is 30)>
[Device-Name]>set telsessiontout <time in seconds between 1 and 36000 (default is 900)>
100fullduplex
autohalfduplex
autoautoduplex (default)
Description
All management channels disabled
Ethernet only enabled
Wireless A only enabled
Wireless B only enabled
Wireless A and Wireless B enabled
All management channels enabled
:
15
:
********
:
80
:
file:///C:/Program Files/ORiNOCO/AP4000/HTML/home.htm
:
disable
:
enable
:
********
AP-4000 User Guide
151
Advertisement
Table of Contents
