Proxim AP-4000 User Manual page 96

Performing Advanced Configuration
SSID/VLAN/Security
— For 64-bit encryption, an encryption key is 10 hexadecimal characters (0-9 and A-F) or 5 ASCII characters (see
Chart).
— For 128-bit encryption, an encryption key is 26 hexadecimal characters or 13 ASCII characters.
— For 152-bit encryption, an encryption key is 32 hexadecimal characters or 16 ASCII characters.
• Encryption Transmit Key: select Key 0, Key 1, Key 2, or Key 3
• 802.1x Station:
• Authentication Mode: 802.1x
• Cipher: WEP
• Encryption Key Length: 64 or 128 Bits.
— If 802.1x is enabled simultaneously with WEP, the 802.1x Station's encryption key length is determined by the WEP encryption
key.
• WPA Station:
• Authentication Mode: 802.1x
• Cipher: TKIP
• WPA-PSK Station:
• Authentication Mode: PSK
• Cipher: TKIP
• PSK Passphrase: an 8-63 character user-defined phrase. It is recommended a passphrase of at least 13 characters, including both
letters and numbers, and upper and lower case characters to ensure that the generated key cannot be easily deciphered by network
infiltrators.
• 802.11i Station:
• Authentication Mode: 802.1x
• Cipher: AES
• 802.11i-PSK Station:
• Authentication Mode: PSK
• Cipher: AES
• PSK Passphrase: an 8-63 character user-defined phrase. It is recommended a passphrase of at least 13 characters, including both
letters and numbers, and upper and lower case characters to ensure that the generated key cannot be easily deciphered by network
infiltrators.
5. When finished configuring all parameters, click OK.
6. If you selected a Security Mode of 802.1x Station, WPA Station, or 802.11i Station, you must configure a RADIUS 802.1x/EAP server.
Refer to the Configuring Radius Profiles
Security Profile 1 will be used by default for all wireless interfaces.
7. Refer to the following section for advanced VLAN configuration options:
8. Reboot the AP.
section.
Adding or Modifying an SSID/VLAN with VLAN Protocol
AP-4000 User Guide
ASCII Character
Disabled.
96