Proxim AP-4000 User Manual page 174

Using the Command Line Interface (CLI)
Parameter Tables
Syslog Host Table
The table described below configures the Syslog hosts that will receive message from the AP. You can configure up to ten Syslog hosts.
Name
Syslog Host Table
Table Index
IP Address
Comment (optional)
Status (optional)
Type Values
Table N/A
Integer 1 – 10
IpAddress User Defined
DisplayString User Defined
Integer enable
disable
delete
Access CLI Parameter
R sysloghosttbl
N/A index
RW ipaddr
RW cmt
RW status
AP-4000 User Guide
174