Reset - Proxim AP-4000 User Manual
Orinoco ap-4000 access point user guide
Hide thumbs
Also See for AP-4000:
- User manual (274 pages) ,
- Specification sheet (2 pages) ,
- Configuration manual (6 pages)
Table of Contents
Advertisement
Performing Commands
Reset
Reset
Use the Reset tab to restore the AP to factory default conditions. The AP may also be reset from the RESET button located on the side of the
unit. Since this will reset the Access Point's current IP address, a new IP address must be assigned. Refer to
information.
CAUTION
!
Resetting the AP to its factory default configuration will permanently overwrite all changes that have made to the unit. The AP will
reboot automatically after this command has been issued.
Figure 6-12 Reset to Factory Defaults Command Screen
AP-4000 User Guide
Recovery Procedures
for more
120
Advertisement
Table of Contents
