Dhcp Relay Server Table; Link Integrity Parameters - Proxim AP-4000 User Manual

Using the Command Line Interface (CLI)
Parameter Tables

DHCP Relay Server Table

The DHCP Relay Server Table contains the commands to set the table entries. The AP supports the configuration of a maximum of 10 server
settings in the DHCP Relay Agents server table.
Name
DHCP Relay Server Table
DHCP Relay Server Table Entry
Index
DHCP Relay Server Table Entry
IP Address
DHCP Relay Server Table Entry
Comment
DHCP Relay Server Table Entry
Status

Link Integrity Parameters

Name
Link Integrity
Link Integrity Status
Link Integrity Poll
Interval
Link Integrity Poll
Retransmissions
Link Integrity IP Target Table
Name
Link Integrity IP Target
Table
Table Index
Target IP Address
Comment (optional)
Status (optional)
Type Values
Table N/A
Integer32 1...10
IpAddress User Defined
DisplayString User Defined
Integer Enable (1)
Disable (2)
Delete (3)
Create (4)
Type Values
Group N/A
Integer enable
disable (default)
Integer 500 - 15000 ms
(in increments of 500ms)
500 ms (default)
Integer 0 - 255
5 (default)
Type Values
Table N/A
Integer 1-5
IpAddress User Defined
DisplayString User Defined (up to 254
characters)
Integer enable
disable (default)
delete
Access CLI Parameter
R dhcprelaytbl
R dhcprlyindex
RW dhcprlyipaddr
RW dhcprlycmt
RW dhcprlystatus
Access CLI Parameter
R linkint
RW linkintstatus
RW linkintpollint
RW linkintpollretx
Access CLI Parameter
R linkinttbl
N/A index
RW ipaddr
RW cmt
RW status
AP-4000 User Guide
161