Inventory Management Information; Network Parameters; Ip Configuration Parameters - Proxim AP-4000 User Manual

Using the Command Line Interface (CLI)
Parameter Tables

Inventory Management Information

Name
System Inventory Management
Component Table
Component Interface Table
NOTE
The inventory management commands display advanced information about the AP's installed components. You may be asked to
report this information to a representative if you contact customer support.

Network Parameters

IP Configuration Parameters

Name
Network
IP Configuration
IP Address
IP Mask
Default Router IP Address
Default TTL
Address Type
NOTE
The IP Address Assignment Type (ipaddrtype) must be set to static before the IP Address (ipaddr), IP Mask (ipmask) or Default
Gateway IP Address (ipgw) values can be entered.
DNS Client for RADIUS Name Resolution
Name
DNS Client
DNS Client status
Primary DNS Server IP
Address
Secondary DNS Server
IP Address
Default Domain Name
Type Values
Subgroup N/A
Subgroup N/A
Subgroup N/A
Type Values
Group N/A
Group N/A
IpAddress User Defined
IpAddress User Defined
IpAddress User Defined
Integer User Defined (seconds)
0-255, 64 (default)
Integer static
dynamic (default)
Type Values
Group N/A
Integer enable
disable (default)
IpAddress User Defined
IpAddress User Defined
Integer32 User Defined (up to 254
characters)
Access CLI Parameter
R sysinvmgmt
R sysinvmgmtcmptbl
R sysinvmgmtcmpiftbl
Access CLI Parameter
R network
R ip (Note: The network and
ip parameters display the
same information)
RW ipaddr
RW ipmask
RW ipgw
RW ipttl
RW ipaddrtype
Access CLI Parameter
R dns
RW dnsstatus
RW dnspridnsipaddr
RW dnssecdnsipaddr
RW dnsdomainname
AP-4000 User Guide
159