Performing Advanced Configuration - Proxim AP-4000 User Manual

Performing Advanced Configuration

• System: Configure specific system information such as system name and contact information.
• Network: Configure IP settings, DNS client, DHCP server, DHCP Relay Agent, DHCP Relay Servers, and Link Integrity.
• Interfaces: Configure the Access Point's interfaces: Wireless A, Wireless B, and Ethernet. Configure a
(WDS).
• Management: Configure the Access Point's management Passwords, IP Access Table, and Services such as configuring secure or
restricted access to the AP via SNMPv3, HTTPS, or CLI. Configure Secure Management, SSL, Secure Shell (SSH), and RADIUS Based
Access Management.
• Filtering: Configure Ethernet Protocol filters, Static MAC Address filters, Advanced filters, and Port filters.
• Alarms: Configure the Alarm (SNMP Trap) Groups, the Alarm Host Table, and the Syslog features.
• Bridge: Configure the Spanning Tree Protocol, Storm Threshold protection, Intra BSS traffic, and Packet Forwarding.
• QoS: Configure Wireless Multimedia Enhancements/Quality of Service parameters and QoS policies.
• Radius Profiles: Configure RADIUS features such as RADIUS Access Control and Accounting.
• SSID/VLAN/Security:
pair. Configure security features such as MAC Access Control, WPA, WEP Encryption, and 802.1x.
To configure the AP using the HTTP/HTTPS interface, you must first log in to a web browser. See
instructions.
You may also configure the AP using the command line interface. Refer to
Set up Automatic Configuration for Static
Configure up to 16 VLAN and SSID pairs per wireless interface, and assign Security and RADIUS Profiles for each
IP.
Using the Command Line Interface (CLI)
AP-4000 User Guide
Wireless Distribution System
Logging into the HTTP Interface
for more information.
4
for
35