Security Profile Table; Command Syntax And Examples Of Configuring Security Profiles - Proxim AP-4000 User Manual

Using the Command Line Interface (CLI)
Parameter Tables

Security Profile Table

The Security Profile Table allows you to configure security profiles. A maximum of 16 security profiles are supported per wireless interface.
Each security profile can be enable and configure one or more security modes (None Secure Station, WEP Station, 802.1x Station, WPA
Station, WPA-PSK Station). The WEP/PSK parameters are separately configurable for each security mode. Refer to the command examples
below for more information.
Name
Security Profile Table
Table Index
Security Mode
Authentication Mode
Cipher
Encryption Key 0
Encryption Key 1
Encryption Key 2
Encryption Key 3
Encryption Transmit Key
Encryption Key Length
Rekey Interval
WPA PSK Value
WPA PSK Pass Phrase

Command Syntax and Examples of Configuring Security Profiles:

Configuring a Security Profile with Non Secure Security Mode
set secprofiletbl <index> secmode nonsecure status enable
Example: set secprofiletbl 2 secmode nonsecure status enable
Configuring a Security Profile with WEP Security Mode
set secprofiletbl <index> secmode wep encryptkey0 <value> encryptkeylength <vakue> encryptkeytx <value>
status enable
Example: set secprofiletbl 3 secmode wep encryptkey0 12345 encryptkeylength 1 encryptkeytx 0 status enable
Configuring a Security Profile with 802.1x Security Mode
set secprofiletbl <index> secmode 802.1x rekeyint 900 status enable
Example: set secprofiletbl 4 secmode 802.1x rekeyint 900 status enable
Configuring a Security Profile with WPA Security Mode
set secprofiletbl <index> secmode wpa rekeyint 900 status enable
Example: set secprofiletbl 5 secmode wpa rekeyint 900 status enable
Type Values
Table N/A
Integer 1.1 to 32.5
Integer nonsecsta
wepsta
802.1xsta
wpasta
wpapsksta
Integer none
802.1x
psk
Integer none
wep
tkip
aes
Integer User defined
Integer User defined
Integer User defined
Integer User defined
Integer 0-3
Integer 64, 128, or 152
Integer
Integer
Integer 8-64 characters
Access CLI Parameter
R secprofiletbl
R index
R secmode
RW authmode
R ciphersuite
RW encryptionkey0
RW encryptionkey1
RW encryptionkey2
RW encryptionkey3
RW encryptkeytx
RW encryptkeylength
RW rekeyint
RW pskkey
RW passphrase
AP-4000 User Guide
179