Set Radius Parameters - Proxim AP-4000 User Manual

Orinoco ap-4000 access point user guide
Hide thumbs Also See for AP-4000:
Table of Contents

Advertisement

Using the Command Line Interface (CLI)
Other Network Settings

Set RADIUS Parameters

Configure RADIUS Authentication servers
Perform the following command to configure a RADIUS Server and assign it to a VLAN. The RADIUS Server Profile index is specified by the
index parameter and the subindex parameter specifies whether you are configuring a primary or secondary RADIUS server.
[Device-Name]>set radiustbl <Index> profname <Profile Name> seraddrfmt <1 - IP Address 2 - Name>
sernameorip <IP Address or Name> port <value> ssecret <value> responsetm <value> maxretx <value>
acctupdtintrvl <value> macaddrfmt <value> authlifetm <value> radaccinactivetmr <value> vlanid <vlan id
-1 to 4094> status enable
Examples of Configuring Primary and Secondary RADIUS Servers and Displaying the RADIUS Configuration
Primary server configuration:
set radiustbl 1.1 profname "MAC Authentication" seraddrfmt 1 sernameorip 20.0.0.20 port 1812 ssecret
public responsetm 3 maxretx 3 acctupdtintrvl 0 macaddrfmt 1 authlifetm 900 radaccinactivetmr 5 vlanid 22
status enable
Secondary server configuration:
set radiustbl 1.2 profname "MAC Authentication" seraddrfmt 1 sernameorip 20.0.0.30 port 1812 ssecret
public responsetm 3 maxretx 3 acctupdtintrvl 0 macaddrfmt 1 authlifetm 900 radaccinactivetmr 5 vlanid 33
status enable
[Device-Name]>show radiustbl
Index
Primary/Backup
Profile Name
Server Status
Server Addressing Format
IP Address/Host Name
Destination Port
VLAN Identifier
MAC Address Format
Response Time
Maximum Retransmission
Authorization Lifetime
Accounting Update Interval
Accounting Inactivity Timer
Index
Primary/Backup
Profile Name
Server Status
Server Addressing Format
IP Address/Host Name
Destination Port
VLAN Identifier
MAC Address Format
Response Time
Maximum Retransmission
Authorization Lifetime
Accounting Update Interval
Accounting Inactivity Timer
Index
Primary/Backup
Profile Name
Server Status
: 1
: Primary
: MAC Authentication
: notReady
: ipaddr
: 0.0.0.0
: 1812
: -1
: dashdelimited
: 3
: 3
: 0
: 0
: 5
: 1
: Backup
: MAC Authentication
: notReady
: ipaddr
: 0.0.0.0
: 1812
: -1
: dashdelimited
: 3
: 3
: 0
: 0
: 5
: 2
: Primary
: EAP Authentication
: notReady
AP-4000 User Guide
153

Advertisement

Table of Contents
loading

This manual is also suitable for:

Orinoco ap-4000

Table of Contents