Interface Parameters; Wireless Interface Parameters - Proxim AP-4000 User Manual

Using the Command Line Interface (CLI)
Parameter Tables

Interface Parameters

Wireless Interface Parameters

The wireless interface group parameter is wif. Wireless Interface A (802.11a radio) uses table index 3 and Wireless Interface B (802.11b/g
radio) uses table index 4.
Common Parameters to 802.11a/b/g
Name
Wireless Interfaces
Table Index
Network Name
Auto Channel Select (ACS)
DTIM Period
RTS/CTS Medium Reservation
MAC Address
Closed System
Wireless Service Status
Supported Frequency Channels
Load Balancing Max Clients
Antenna Diversity
3
Distance Between APs
Note 1: For 802.11a APs in Europe's middle frequency band (5.25-5.35 GHz), Auto Channel Select is a read-only parameter; it is always
enabled.
Note 2: Wireless Service Status cannot be shutdown on an interface where Rogue Scan is enabled.
Note 3: Distance Between APs allows the AP to perform better in high noise environments by increasing the recieve sensitivity and transmit
defer threshold, as follows:
Distance Receive Sensitivity
Between APs
Value
Large 0
Medium 9
Small 17
Mini 25
Micro 33
Type Values
Group N/A
Integer 3 (Wireless Interface A)
or 4 (Wireless Interface
B)
DisplayString 1 – 32 characters
My Wireless Network
(default)
1
Integer enable (default)
disable
Integer 1 – 255
1 = default
Integer 0 – 2347
Default is 2347 (off)
PhyAddress 12 hex digits
Integer enable
disable (default)
2
Integer 1 = resume
2= shutdown
Octet String Depends on Regulatory
Domain
Integer 1 – 63
Integer 1 (Antenna 1),
2 (Antenna 2),
3 (Antenna 3),
4 (Antenna 4),
5 (Auto)
Integer 1 (large) (default)
2 (medium)
3 (small),
4 (minicell)
5 (microcell)
Transmit Defer
Threshold
dBm Value
-96 33
-86 33
-78 43
-70 53
-62 59
Access
R
R
RW
RW
RW
RW
R
RW
RW
R
R/W
R/W
R/W
Threshold
dBm
-62
-62
-52
-42
-36
CLI Parameter
wif
index
netname
autochannel
dtimperiod
medres
macaddr
closedsys
wssstatus
suppchannels
lbmaxclients
atdiversity
distaps
AP-4000 User Guide
162