Proxim AP-4000 User Manual page 136

Using the Command Line Interface (CLI)
CLI Command Types
Figure A-4 Result of "s?" CLI command
Example 3. Display parameters for set and show
Example 3a allows you to see every possible parameter for the set (or show) commands. Notice from example 3a that the list is very long.
Example 3b shows how to display a subset of the parameters based on initial parameter letters.
Example 3a. Display every parameter that can be changed
[Device-Name]>set ?
.
.
.
.
Figure A-5 Result of "set ?" CLI command
Example 3b. Display parameters based on letter sequence
This example shows entries for parameters that start with the letter "i". The more letters you enter, the fewer the results returned. Notice that
there is no space between the letters and the question mark.
[Device-Name]> show ipa?
Figure A-6 Result of "show ipa?" CLI command
[Device-Name]> show iparp?
Figure A-7 Result of "show iparp?" CLI command
AP-4000 User Guide
136