Getting Started
Related Topics
Figure 2-13 System Status Screen
The buttons on the left of the screen provide access to the monitoring and configuration options for the AP. See
more information about the Status screen.
The Command Line Interface (CLI) also provides a method for monitoring and configuring the AP using Telnet or a serial connection. For
more information about monitoring and configuring the AP with the CLI, refer to
Related Topics
The Setup Wizard helps you configure the basic AP settings required to get the unit up and running. The AP supports many other
configuration and management options. The remainder of this user guide describes these options in detail.
•
See
Performing Advanced Configuration
interface.
•
See
Monitoring the AP-4000
•
See
Performing Commands
•
See
Troubleshooting the AP-4000
•
See
Using the Command Line Interface (CLI)
for information on configuration options that are available within the Access Point's HTTP
for information on the statistics displayed within the Access Point's HTTP interface.
for information on the commands supported by the Access Point's HTTP interface.
for troubleshooting suggestions.
for information on the CLI interface and for a list of CLI commands.
Using the Command Line Interface
AP-4000 User Guide
Viewing Status Information
for
(CLI).
33