Performing Advanced Configuration
Alarms
–
Comment: Enter an optional comment such as the host name.
–
Status: The entry is enabled automatically when saved (so the Status field is only visible when editing an entry). You can also disable
or delete entries by changing this field's value.
Syslog Messages
The following messages are supported in the AP:
Message
Auto Configuration via DHCP
Auto Configuration for static IP
TFTP server IP/Config filename missing in DHCP response Minor
AutoConfig TFTP server IP address used is <IP address>
AutoConfig filename used is <filename>
AutoConfig TFTP download failed
Image Error check, invalid image
AP Heartbeat status
Client Authentication State
Accounting
RADIUS Responses
MIC Attack Detected
MIC Attack Report Detected
Severity
Informational
Informational
Informational
Informational
Minor
Minor
Minor
Informational
Informational
Informational
Major
Major
AP-4000 User Guide
73