Proxim AP-4000 User Manual page 163

Using the Command Line Interface (CLI)
Parameter Tables
802.11a Only Parameters
Name
Operating Frequency Channel
Supported Data Rates
Transmit Rate
Physical Layer Type
SuperMode
TurboMode
Note 1: Super Mode must be enabled first on the wireless interface before Turbo Mode can be enabled.
Type Values
Integer Varies by regulatory
domain and country. See
802.11a Channel
Frequencies
Octet String See Transmit
below
Integer32 0 - Auto Fallback
(default)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
Integer ofdm (orthogonal
frequency division
multiplexing) for 802.11a
Integer enable
disable (default)
Integer enable
disable (default)
Access CLI Parameter
RW channel
Rate, R suppdatarates
RW txrate
R phytype
RW supermode
RW turbomode
AP-4000 User Guide
163