Other Parameters; Iapp Parameters; Wireless Multimedia Enhancements (Wme)/Quality Of Service (Qos) Parameters; Enabling Qos - Proxim AP-4000 User Manual

Using the Command Line Interface (CLI)
Parameter Tables

Other Parameters

IAPP Parameters

Name
IAPP
IAPP Status
Periodic Announce
Interval (seconds)
Announce Response
Time
Handover Time-out
Max. Handover
Retransmissions
Send Announce
Request on Startup
NOTE
These parameters configure the Inter Access Point Protocol (IAPP) for roaming. Leave these settings at their default value unless a
technical representative asks you to change them.

Wireless Multimedia Enhancements (WME)/Quality of Service (QoS) parameters

The Wireless Multimedia Enhancements commands enable and configure Wireless Multimedia Enhancement/Quality of Service parameters
per wireless interface. The following two commands are part of the Wireless Interface Properties table.

Enabling QoS

Name
QoS Status
QoS Maximum Medium
Threshold

Configuring QoS Policies

The QoS group manages the QoS policies:
Name
QoS Group
QoS Policy Table
Table Primary Index
Table Secondary Index
Policy Name
Policy Type
Priority Mapping Index
Apply QoS Marking
Table Row Status
Type Values
Group N/A
Integer enable (default)
disable
Integer 80
120 (default)
160
200
Integer 2 seconds
Integer 410 ms
512 ms (default)
614 ms
717 ms
819 ms
Integer 1 - 4 (default 4)
Integer enable (default)
disable
Type Values
Object Status enable
disable (default)
Integer 50 - 90
Type Values
Group N/A
Table N/A
Integer N/A
Integer N/A
Display String 0 - 32 characters
Integer inlayer2,
inlayer3,
outlayer2,
outlayer3,
spectralink
Integer See Note.
Object Status enable
disable
Row Status enable
disable
delete
Access CLI Parameter
R iapp
RW iappstatus
RW iappannint
R iappannresp
RW iapphandtout
RW iapphandretx
RW iappannreqstart
Access CLI Parameter
RW qosstatus
RW qosmaximummediumthreshold
Access CLI Parameter
N/A qos
N/A qospolicytbl
R index
R secindex
RW policyname
RW type
RW mapindex
RW markstatus
RW status
AP-4000 User Guide
181