#11, #12 & #6 LOG PLACEMENT
Position #11, #12, and #6 logs onto corresponding cut-outs / notches on base logs.
The #6 log must not extend over front of #2 log.
11
12
Figure 29a
#7, #8 & #9 LOG PLACEMENT
Position #7, #8 and #9 logs onto corresponding cut-outs / notches on base, center
logs and log grate.
7
Figure 29b
COMPLETE LOG SET INSTALLATION
Use a steel or stiff bristle nylon brush to distribute Rock Wool Embers onto logs and burner.
Figure 29c
Randomly place „Klinkers‟ in this area. Do not place „Klinkers‟ directly on burner ports.
LOG SET INSTALLATION cont.
6
8
9
PAGE 29